Filter
Top Products
DES-7200 Configuration Guide Chapter 10 DNS Configuration
10-5
destination.com static 1.1.1.20 ---
Step 2: Execute "ping destination.com" command to verify the result.
SwitchA#ping destination.com
Translating "destination.com"...[OK]
Sending 5, 100-byte ICMP Echoes to 1.1.1.20, timeout is 2 seconds:
< press Ctrl+C to break >
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 1/1/1 ms
From the above information, we can learn that Switch A has successfully
accessed the host with IP address being 1.1.1.20 through the host name of
destination.com by means of static DNS.
10.3.2 Example of Dynamic
DNS Configuration
10.3.2.1 Topological Diagram
Figure2 Network topology for dynamic DNS configuration
10.3.2.2 Application Requirements
1. The IP address of DNS server is 192.168.31.206/24.
2. The switch is the DNS client and can access the host of 10.1.1.2 through
the host name of host.com by means of dynamic DNS.