Filter
Top Products
DES-7200 Configuration Guide Chapter 1 SNMP
Configuration
1.4.1.1 Topological Diagram
Topology for SNMP v1/2 application
1.4.1.2 Application Requirements
The Network Management Station (NMS) manages the network device (Agent)
by applying the community-based authentication model, and the network device
can control the operation permission (read or write) of the community to access
the specified MIB objects. For example, community "user1" can only read and
write objects under System (1.3.6.1.2.1.1) node.
The network device can only be managed by NMS with a specific IP (i.e.,
192.168.3.2/24).
The network device can actively send messages to NMS.
The NMS can acquire the basic system information of the device, such as
contact, location, ID and etc.
1.4.1.3 Configuration Tips
By creating MIB view and associating authentication name (Community) and
access permission (Read or Write), the first application need can be met.
While configuring the authentication name and access permission, associate
ACL or specify the IP of administrator using this authentication name to meet
the second application need (this example associates the ACL).
Configure the address of SNMP host and enable the Agent to actively send
Traps.
Configure the parameters of SNMP proxy.
1.4.1.4 Configuration Steps
Step 1: Configure MIB view and ACL.
! Create a MID view named "v1", which contains the associated MIB object
(1.3.6.1.2.1.1).
DES-7200(config)#snmp-server view v1 1.3.6.1.2.1.1 include
1-15