Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuration File Management
2-5
2.3.1. onfiguration Change 3 Enable C
Notification
By default, the configuration change notificatio mode
and execute the following steps to enable configuration change notification function.
n function is disabled. Enter privilege
Command Function
DES-7200# configure terminal
Enter global configuration mode.
DES-7200(config)# archive
Enter archive configuration mode.
DES-7200(config-archive)# log config
Enter archive log configuration mode.
DES-7200(config-archive-log-config)# Enable configuration change notification.
notify syslog
To xecute "no notify syslog" command in "log config"
config
Con
# Enable conf
DES-7200# configure terminal
one per line. End with CNTL/Z.
DES-7200(config)# rchive
2.3.1. figuration Change
rmation
restore to the default setting, e
uration mode.
figuration example:
iguration change notification.
Enter configuration commands,
a
DES-7200(config-archive)# log config
DES-7200(config-archive-log-config)# notify syslog
4 View Con
Log Info
The following commands are provided to
memory usage status.
information and display configuration log
Command Function
D S-7200# show archive log
{{ ll | start-num [end-num]} [pro
ontenttype [plaintex
E config
a visioning
| c t]] | statistics}
Display configuration log information and
memory usage status.
2.4
Comparison
Configuration File
Display the difference between two specified configuration files
Display the difference between the specified configuration file and the existing
configurations running on the device