Filter
Top Products
DES-7200 Configuration Guide Chapter 4 DHCP Configuration
4-18
Command Function
DES-7200# clear ip dhcp server
statistics
Clear the DHCP server statistics.
To debug the DHCP server, execute the following command in the command
execution mode:
Command Function
DES-7200# debug ip dhcp server
[events | packet]
Debug the DHCP server.
To show the working status of the DHCP server, execute the following
commands in the command execution mode:
Command Function
DES-7200# show ip dhcp binding
[address]
Show the DHCP address binding
information.
DES-7200# show ip dhcp conflict
Show the DHCP address conflict
information.
DES-7200# show ip dhcp server
statistics
Show the DHCP server statistics.
4.6.2 Monitoring and
Maintaining
the DHCP
Client
There are two types of commands for monitoring and maintaining the DHCP
client. The following operations can be performed on the DHCP client:
Debug commands, used to output necessary debugging information. Such
commands are mainly used to diagnose and clear faults.
Show commands, used to show information about DHCP.
To debug the DHCP client, execute the following command in the command
execution mode:
Command Function
DES-7200# debug ip dhcp client
Debug the DHCP client.
To show information about the lease that the DHCP client obtains, execute the
following command in the command execution mode:
Command Function