Filter
Top Products
DES-7200 Configuration Guide Chapter 1 SNMP
Configuration
1.2.6 Defining the Maximum
Message Size of the SNMP
Agent
In order to enhance network performance, you can configure the maximum
packet size of the SNMP Agent. To configure the maximum packet size of the
SNMP Agent, run the following command in the global configuration mode:
Command Function
DES-7200(config)# snmp-server
packetsize byte-count
Set the maximum packet size of the
SNMP Agent.
1.2.7 Shielding the SNMP Agent
The SNMP Agent service is a service provided by DES-7200product and
enabled by default. When you do not need it, you can shield the SNMP agent
service and related configuration by executing the following command in the
global configuration mode:
Command Function
DES-7200(config)# no snmp-server
Shield the SNMP agent service.
1.2.8 Disabling the SNMP Agent
DES-7200 products provide a different command from the shield command to
disable the SNMP Agent. This command will act on all of the SNMP services
instead of shielding the configuration information of the SNMP Agent. To
disable the SNMP agent service, run the following command in the global
configuration mode:
Command Function
DES-7200(config)# no enable
service snmp-agent
Disable the SNMP agent service.
1.2.9 Configuring the SNMP
Agent to Send the Trap
Message to the NMS
Initiatively
The TRAP message is a message automatically sent by the SNMP Agent to the
NMS unsolicitedly, and is used to report some critical and important events. By
default the SNMP Agent is not allowed to send the TRAP message. To enable it,
run the following command in the global configuration mode:
Command Function
1-9