Filter
Top Products
DES-7200 Configuration Guide Chapter 6 Syslog Configuration
6-3
Terminal Mon
Lo st
informatio O allows the configuration of at most 5 syslog servers. The log
itor allows log information to be displayed on the current VTY (such as
dow).
specifies the address of the syslog server that will receive the log
ur product
the telnet win
gging Ho
n.
information will be sent to all the syslog servers at the same time.
Caution
switch of the log
syslog
server.
To send the log information to the syslog server, it is required to turn on
the timestamp switch or sequential number
information. Otherwise, log information will not be sent to the
Logging File
have any exte
An ra tension for the filename will be refused.
More flash: filename command shows the contents of the log file in the flash.
Flash: Record log information in FLASH. The filename for log shall not
nsion to indicate the file type. The extension of the log file is fixed as txt.
tion of ex
y configu
Caution
extended FLASH, the log information will be recorded in the serial
FLASH.
Some devices suppo
FLASH, the log inf
rt extended FLASH. If the device has extended
ormation will be recorded there. If the device has no
6.2.3 Enabling the Log Timestamp
Switch of Log Information
To add or del ion, run the following co
config
ete timestamp in log informat
uration mode:
mmand in the global
Command Function
DES-7200(config)# service timestamps
Enable the timestamp in the log
message-type [uptime | datetime]
information
DES-7200(config)# no service timestamps
Disable the timest
message-typ
amp in the log
e
information
The timestam
th im riately.
Message type: log or debug. The "log" type means the log information with severity
ans that with severity level 7.
p are available in two formats: device uptime and device datetime. Select
estamp approp
e type of t
levels 0-6. The "debug" type me
Caution
device automatically uses the startup time as the timestamp for the log
information.
If the current device has no RTC, the configured time is invalid, and the