Filter
Top Products
DES-7200 Configuration Guide Chapter 3 SSH Terminal Service Configuration
192.168.5.245. Port 22 is the default number of the port for SSH listening.
username, and does not take effect when the device
uthentication” indicates the authentication mode, and
the username/p sed password
is the same as
Click “OK”
“Username” indicates the
only requires password. “A
assword authentication is supported here. The u
the Telnet password.
to pop up the following dialog:
Figure-2
Click “Connect” to log into the host just configured, as shown below:
Figure-3
Ask the mach er the
ve” or “Accept
Once” to ente
ine that is logging into the host 192.168.5.245 to see wheth
key from the server end is received or not. Select “Accept & Sa
r the password confirmation dialog box, as shown below:
Figure-4
3-5