Filter
Top Products
DES-7200 Configuration Guide Chapter 2 MAC Address Configuration
2-20
Caution
Above listed commands can only be supported by the 7200-24,
7200-24G, 7200-48, 7200-48P, 7200-2XG, 7200-4XG, 7200-24GE
and 7200-24G2XG line cards of DES-7200 series.
2.6.2 Viewing
Configurations
Show the maximum number of dynamic addresses for a specified VLAN:
DES-7200#show mac-address-table max-dynamic-mac-count vlan 1
vlan limit mac count learning
---- ------- --------- --------
1 160 6 YES
Show the maximum number of dynamic addresses for all VLANs:
DES-7200#show mac-address-table max-dynamic-mac-count
vlan limit mac count learning
---- ------- --------- --------
1 160 6 YES
3 500 124 YES
Caution
Above listed commands can only be supported by the 7200-24,
7200-24G, 7200-48, 7200-48P, 7200-2XG, 7200-4XG, 7200-24GE
and 7200-24G2XG line cards of DES-7200 series.
2.7 Setting the Static MAC
Addresses
2.7.1.1 Adding and Removing the
Static MAC Addresses
You can add a static address to the MAC address table by specifying the
destination MAC address, the VLAN (the static address will be added to the
address table of this VLAN), and the interface (the packets to the destination
MAC address are forwarded to this interface).
To add a static address, execute the following commands:
Command Function