Filter
Top Products
DES-7200 Configuration Guide Chapter 2 RMON
Configuration
Command Function
DES-7200(config-if)# rmon collection history
index [owner ownername] [buckets
bucket-number] [interval seconds]
Add a history entry.
DES-7200(config-if)# no rmon collection
history index
Remove a history entry.
Caution
The current version of DES-7200 product supports only the records of
Ethernet. The index value should be within 1 to 65535. At most 10 history
entries can be configured.
Bucket-number: Specifies the used data source and time interval. Each
sampling interval should be sampled once. The sampling results are saved. The
Bucket-number specifies the maximum number of sampling. When the
maximum is reached for the sampling records, the new one will overwrite the
earliest one. The value range of Bucket-number is 1 to 65535. Its default value
is 10.
Interval: Sampling interva in the range of 1 to 3600 seconds, 1800 seconds by
default.
2.2.3 Configuring
Alarm and
Event
One of these command can be used to configure the alarm:
Command Function
DES-7200(config)# rmon alarm number
variable interval {absolute | delta}
rising-threshold value [event-number]
falling-threshold value [event-number] [owner
ownername]
Add an alarm entry.
DES-7200(config)# rmon event number [log]
[trap
community] [description description-string]
Add an event entry.
DES-7200(config)# no rmon alarm number
Remove an alarm.
DES-7200(config)# no rmon event number
Remove an event.
number: Alarm index in the range of 1 to 65535.
variable: Variable to be monitored by the alarm(in integer).
2-3