Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuring BGP IP VPN
2-74
DES-7200(config-router)#
extcommunity-type {router-id
{0107|8001} | route-type
{0306|8000}}
(Optional) Configure the Extended Communities
attribute of OSPF router-id and route-type.
DES-7200(config-router)# show
running-config
Display existing configurations
Note
This command is only applicable to OSPF instance associated with
VRF.
The type configuration of router-id provides good compatibility with
multiple manufacturers. For example, some manufacturers only
support the router-id type of 0x0107. When interconnecting with such
manufacturers, you must execute "extcommunity-type" command to
set the type of router-id to 0x0107.
The type configuration of route-type provides good compatibility with
multiple manufacturers. For example, some manufacturers only
support the route-type type of 0x8000. When interconnecting with
such manufacturers, you must execute "extcommunity-type"
command to set the type of route-type to 0x8000.
# Configure the type of router-id of VRF OSPF protocol to 0x0107
DES-7200# configure terminal
DES-7200(config)# router ospf 10 vrf vrf1
DES-7200(config-router)# extcommunity-type router-id 0107
2.4 Verifying the L3VPN
Configuration
This section describes how to verify the L3VPN configurations and VPN routes. Enter the
privilege mode and run the following commands.
Command Function
DES-7200# show ip vrf [vrf_name]
Display the VRF configuration information.