Filter
Top Products
DES-7200 Configuration Guide Chapter 1 Protocol-Independent
Configuration
1-6
Command Function
DES-7200(config-route-map)# match ipv6
next-hop { access-list-name | prefix-list
prefix-list-name }
Match the next-hop IP address in the
ACL or the prefix list.
DES-7200(config-route-map)# match ipv6
route-source { access-list-name |
prefix-list prefix-list-name }
Match the route source IP addres in
the ACL or the prefix list.
DES-7200(config-route-map)# match
metric metric
Match the route metric value.
metric ：0-4294967295
DES-7200(config-route-map)# match
origin {egp | igp | incomplete}
Match the route origin type.
DES-7200(config-route-map)# match
route-type {local | internal | external
[level-1 | level-2]}
Match the route type.
DES-7200(config-route-map)# match tag
tag
Match the route tag value.
tag ：0-4294967295
To define the oeration after matching, use the following command in the route
map configuration mode:
Command Function
DES-7200(config-route-map)# set
aggregator as as-num ip_addr
Set the AS attribute value for the
route aggregator.
DES-7200(config-route-map)# set as-path
prepend as-number
Set the AS_PATH attribute value.
DES-7200(config-route-map)# set
comm-list community-list-number |
community-list-name delete
Cancel all community attribute value
in the COMMUNITY_LIST.
DES-7200(config-route-map)# set
community
{community-number[community-numbe…]
additive | none}
Set the COMMUNITY attribute value.