Filter
Top Products
DES-7200 Configuration Guide Chapter 1 AAA Configuration
1-32
username:
1. Support to use the single character, such as “.”, “\”, “@” to tell the username and the
domain-name apart.
2. The single “@” character is followed by the character string “domain-name”. With multiple
“@” characters in the username, use the character string following the last “@” characeter as
the domain-name. For example, if the username is a@b@c@d, use the a@b@c as the
username and use the d as the domain-name.
3. The single “\” character follows the character string “domain-name”. With multiple “\”
characters in the username, use the character string followed by the first “\” characeter as the
domain-name. For example, if the username is a\b\c\d, use the b\c\d as the username and use
the a as the domain-name.
4. The single “.” character is followed by the character string “domain-name”. With multiple “.”
characters in the username, according to the pre-settings, use the character string following
the last “.” characeter as the domain-name. For example, if the username is a.b.c.d, use the
a.b.c as the username and use the d as the domain-name.
5. If all characters of “.”, “\” and “@” exist in the username, when matching the domain-name,
use the rules in sequence of the “@”, “\” and “.” characters.
Command Function
configure terminal
Enter the global configuration mode.
aaa domain domain-name
Create the domain and enter the domain
configuration mode.
Note
The domain-name-based AAA service supports the domain name in the length of
up to 64 characters, which is not case-sensitive.
1.9.2.5 Configuring the Domain
Attribute Collection
Use the following commands to select the AAA service method list in the domain configuration
mode:
Command Function
authentication dot1x {default | list-name}
In the domain configuration mode, select the
authentication method list.
accounting network {default | list-name}
In the domain configuration mode, select the
accounting method list.