Filter
Top Products
DES-7200 Configuration Guide Chapter 10 DNS Configuration
10-3
table. You can obtain the mapping table in two ways: manual configuration and
dynamic learning.
Command Function
DES-7200(config)# ip host
host-name ip-address
Configure the host name to IP address
mapping manually.
DES-7200(config)# ipv6 host
host-name ip-address
Configure the host name to IPv6 address
mapping manually.
This command with the parameter no can be used to remove the mapping
between the host name and IP/IPv6 address.
10.2.5 Clearing the
Dynamic Buffer
Table of Host Names
This section describes how to clear the dynamic buffer table of host names. If
the command clear host or clear host * is entered, the dynamic buffer table will
be cleared. Otherwise, only the entries of specified domain names will be
cleared.
Command Function
DES-7200# clear host [word]
Clear the dynamic buffer table of host names.
The host names configured statically will not
be removed.
10.2.6 Showing Domain
Name Resolution
Information
This section describes how to display the DNS configuration.
Command Function
DES-7200# show hosts
Show the DNS configuration.
DES-7200# show hosts
DNS name server :
192.168.5.134 static
host type address
www.163.com static 192.168.5.243
www.DES-7200.com dynamic 192.168.5.123