Filter
Top Products
DES-7200 Configuration Guide Chapter 2 VRRP Plus Configuration
2-10
2.5.2 show vrrp balance
Execute the following two commands to display the running status of VRRP
Plus:
Command Function
DES-7200# show vrrp balance [ brief |
group ]
To display the status of VRRP Plus. Specify
the group number and display the brief
information.
DES-7200# show vrrp balance interface
type number [ brief ]
Display VRRP Plus information on the
specified interface. Parameter "brief"
indicates brief information.
The followings are the examples of using these commands:
1. show vrrp balance [ brief | group ]
DES-7200# show vrrp balance brief
Interface Grp State Group Addr MAC addr
VLAN 1 1 BVG 192.168.1.1 0000.5e00.0101
DES-7200#show vrrp balance
VLAN 1 - Group 1
State is BVG
Virtual IP address is 192.168.1.54
Hello time 1 sec, hold time 3 sec
Load balancing: host-dependent
Redirect time 300 sec, forwarder time-out 14400 sec
Weighting 100 (configured 100), thresholds: lower 1, upper 100
Track object 1, state: down
There are 2 forwarders
Forwarder 1 (local)
MAC address:
0000.5e00.0101
Owner ID is 00d0.f822.33ab
Forwarder 2
MAC address:
001a.a916.0201
Owner ID is 00d0.f822.8800
2. show vrrp balance interface type number [ brief ]
DES-7200# show vrrp balance interface vlan 1
VLAN 1 - Group 1
State is BVG
Virtual IP address is 192.168.1.54
Hello time 1 sec, hold time 3 sec
Load balancing: host-dependent
Redirect time 300 sec, forwarder time-out 14400 sec
Weighting 100 (configured 100), thresholds: lower 1, upper 100
Track object 1, state: down
There are 2 forwarders
Forwarder 1 (local)
MAC address:
0000.5e00.0101