DES-7200 Configuration Guide Chapter 4 WRED Configuration
4-4
2. random-detect probability;
3. Threshold-Cos.
4.2.3.2 Configuring Min-threshold
To configure the min_threshold value, run the following commands in the
interface configuration mode:
Command Function
DES-7200# config terminal
Enter the global configuration mode.
DES-7200(config)# interface
<interface>
Enter the interface configuration mode.
DES-7200(config-if)# wrr-queue
random-detect min-threshold
queue_id thr1 [thr2 thr3]
Configure the minimum threshold value.
DES-7200(config-if)# show queueing
wred interface <interface>
Show the WRED minimum threshold
configuration.
The following example shows how to set the minimum threshold of queue 1 on
an interface:
DES-7200(config-if)#wrr-queue random-detect min-threshold 1 68 69
Caution
When both the min_threshold and the max_threshold are 100%,
the WRED is disabled.
4.2.3.3 Configuring Random-detect
Probability
To configure the random-detect probability, run the following commands in the
interface configuration mode:
Command Function
DES-7200# config terminal
Enter the global configuration mode.
DES-7200(config)# interface
<interface>
Enter the interface configuration mode.
DES-7200(config-if)# wrr-queue
random-detect probability
queue_id prob1 [prob2 prob3]
Configure the random-detect probability.