Filter
Top Products
DES-7200 Configuration Guide Chapter 4 DLDP Configuration
4-5
Note
1) Running the clear-dldp all command to clear the times when
all links on an interface are changed from UP to DOWN
within a period of time and to record the times from 0.
2) Running the clear-dldp ip [nexthopip] command to clear
the times when the specified link is changed from UP to
DOWN within a period of time and to record the times from 0.
4.2.8 Checking the Times when
Ethernet Link Status is UP
and DOWN Within a Period
of Time
Command Function
DES-7200(config-if)# show dldp interface [ ]
[FastEthernet/GigabitEthernet number]
It is used to check the times when
Ethernet links are changed from
UP to DOWN within a period of
time on the configured
DLDP-enabled interface.
Note
1) Run the show dldp interface command to check the times
of all Ethernet links when their status is UP and DOWN and
the time for beginning to record the times.
2) Run the show dldp interface
FastEthernet/GigabitEthernet number command to
check the times when links are UP and DOWN on the
Ethernet interface and the time for beginning to record the
times.