Filter
Top Products
DES-7200 Configuration Guide Chapter 2 MAC Address Configuration
2-14
Compatible Packets with IPV4+MAC are
forwarded.
The IPV6 packets binded with the
source MAC addresses are
forwarded.
2.1.8.3 Exceptional Ports for the
Address Binding
By default, the IP address and MAC address binding function is effective on all
ports. You can configure the exceptional ports to make this address binding
function ineffective on some ports.
Note
Because the binding relationship on the uplink port is uncertain,
generally the uplink port is configured as the exceptional port. It is
not necessary to check the IP address and MAC address binding
on the uplink port.
Caution
For DES-7200 series, the ARP Check function takes no effect on
the IP+MAC binding exceptional port.
2.1.9 Related
Protocols
《IEEE Std 802.3
TM
Carrier sense multiple access with collision detection
(CSMA/CD) access method and physical layer specifications》
《IEEE Std 802.1Q
TM
Virtual Bridged Local Area Networks》
2.2 Default MAC Address
Table Configuration
Function Default
Dynamic address aging time 300s
Dynamic address learning mode dispersive
Dynamic address synchronization disabled
Limit of VLAN dynamic address disabled
MAC address change notification disabled
Address-bind mode compatible
Bridge Protocol Frame Forwarding Action BPDU: not forward
802.1x: forward
GVRP: not forward