Filter
Top Products
DES-7200 Configuration Guide Chapter 2 IPv6 Configuration
2-23
Command Meaning
DES-7200#copy running-config
startup-config
(Optional) Save the configuration.
The no command of above commands can be used to restore the default value. For
details, refer to IPv6 Command Reference.
2.3 IPv6 Monitoring and
Maintenance
It is mainly used to provide related command to show some internal information of the
IPv6 protocol, such as the ipv6 information, the neighbor table and the route table
information of the interface.
Command Meaning
Show ipv6 interface [interface-id]
[ra-info]
Show the IPv6 information of the interface.
Show ipv6 neighbors [verbose]
[interface-id] [ipv6-address]
Show the neighbor information.
Show ipv6 route [static] [local]
[connected]
Show the information of the IPv6 routing table.
1. View the IPv6 information of an interface.
DES-7200# show ipv6 interface
interface vlan 1 is Down, ifindex: 2001
address(es):
Mac Address: 00:d0:f8:00:00:01
INET6: fe80::2d0:f8ff:fe00:1 , subnet is fe80::/64
INET6: fec0:1:1:1::1 , subnet is fec0:1:1:1::/64
Joined group address(es):
ff01:1::1
ff02:1::1
ff02:1::2
ff02:1::1:ff00:1
MTU is 1500 bytes
ICMP error messages limited to one every 10 milliseconds
ICMP redirects are enabled
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds