Filter
Top Products
DES-7200 Configuration Guide Chapter 3 RIPng
Configuration
3-8
input the following command in user mode or privilege mode:
Command Function
DES-7200# show ipv6 rip
Display RIPng routing process
information.
3.2.10.4 Show RIPng Debugging Information
To display the debugging information of RIPng routing process, input the following
command in the privileged EXEC mode or global configuration mode:
Command Function
DES-7200# show debugging
Display the debugging information of
RIPng routing process.
3.3 Configuration Examples
3.3.1 Configure Default Route Advertisement
Configuration requirements
There are three devices (see Fig 1 for device connection) running RIPng. The
gateway device of Router A advertises the default route to Router B and Router C,
with metric being 3. All RIPng interfaces of Router B and Router C are configured
to passive mode, so as not to send out RIPng update messages.
Fig 2 Configuration of default route advertisement
Detailed configuration
Router A:
# Configure network interface