Filter
Top Products
DES-7200 Configuration Guide Chapter 1 File System Configuration
1-2
d
by the TFTP is C:\
C:\download. t
c:\download\binary\firm
location: IP address or host name
/directory: position for file transmission. For instance, the file transmission directory specifie
server download, the file path specified by the device is the one under
ftp://192.168.0.1/binary/firmware.bin refers to the
ware.bin file on the TFTP server of the IP address of 192.168.0.1.
TFTP transmits only the files in the size of less than 32M. To transmit
Note
the files in the size of larger than 32M, use the FTP protocol.
Locate the local file
To locate the local file from FLASH, USB and the FLASH of the control mo
use the [prefix]:[directory/]filename syntax. For example:
dule of the device,
usb0:/back r
slave:/firmware.bin: the file under the
flash:/config.text: the configuration on the local FLASH
up/firmwa e.bin.bak: the file on the first USB
root directory of the secondary control module
Note
Without prefix, the syntax refers to the file system type in the current
path, for instance, usb0 under the root directory of USB0.
When you use prefix to specify a local file, the path after “:” must be
Note
absolute path.
Description of URL prefix
fferent devices and file operation commands can
run different file systems. You can show the file system supported on the device by the show
file system comm
The followi shows the UR
URL prefix is used to specify a file system. Di
and.
ng table L prefixes:
Prefix Description
flash:
FLASH, which can be used on all devices. The startup
of a device when
program is generally stored in the FLASH
delivery.
Tftp:
rver
TFTP se
xmodem:
s through xModem
Receive and send file
slave:
FLASH on the secondary control module of the rack-mounted
device
Usb0:
The first USB device