Filter
Top Products
DES-7200 Configuration Guide Chapter 2 Configuration File Management
2-7
+ ip dhcp snooping bootp-bind
interface GigabitEthernet 0/3
+ip dhcp snooping limit rate 1000
+snmp-server host 1.1.1.2 traps public
-ip dhcp snooping verify mac-address
-snmp-server host 1.1.1.1 traps public
2.4.2 Display the
Difference Between
the Specified
Configuration File
and the Existing
Configurations
Enter privilege mode and execute the following steps to display the difference between
the specified configuration file and the existing configurations running on the device:
Command Function
show archive config incremental-diffs
[file]
Display the difference between file and the
existing configurations running on device
based on the parameter file.
If file is not specified, then the system will assume file as config.text in the flash.
Configuration example 1:
# Display the difference between config.bak in flash and the existing configurations
running on the device.
DES-7200# show archive config incremental-diffs flash:config.bak
Configuration example 2:
# If the configuration file is stored on the server or other network device, you can use
TFTP to download to the local device before comparison. For example, to compare
configbak.text on server 192.168.12.11 with the existing configurations running on the
device (in order to understand which configurations have been added), assuming that
configbak.text and the existing configurations running on the device contain the following
configuration information:
configbak.text Existing configurations
ip dhcp snooping information option ip dhcp snooping verify mac-address