Filter
Top Products
DES-7200 Configuration Guide Chapter 5 System Upgrade Configuration
Wait for
lement local
CTRL'.
]
in flash.
r the boot/ctrl/main
programs of all line cards and the slave board need to be installed and complete the
---
(Slot 3): MAIN installed.
ll images is installed.
set.
Erasing device...eeeeeeeeeeeeeeeeeeeeeeee [ok]
Writing flash ################# [OK - 1,215,488 bytes]
UPGRADE-5-SLOT_FIN: (Slot M2): All images is installed.
*Aug 7 07:48:00: %UPGRADE-5-RESET_CARD: (Slot M2): Reset.
eed two reboots. The line card will reboot
ain
program, the boot or ctrl image will be installed.
These images in linecard will be updated:
---- ----- ----------------
automatic installation of device:
After entering the main program, the main management board will imp
installation first:
*Apr 1 07:32:17: %UPGRADE-5-LOCAL_BEG: Installing: 'flash:
*Apr 1 07:32:17: %UPGRADE-5-LOCAL: Upgrading CTRL.
Upgrading CTRL...
DO NOT POWER OFF!
Erasing device...eeeeeeeeeeeeeeeeeeeeeeeee [ok]
Writing flash #################### [OK - 1,215,488 bytes
*Apr 1 07:32:44: %UPGRADE-5-LOCAL_FIN: New software image installed
Upon completion of local installation, the system will verify whethe
corresponding installation automatically. This automatic installation process will
generally take place when the current device version is lower than 10.4(2).
These images in linecard will be updated:
Slot image linecard
---- ----- -------------
3 MAIN 7200-24
M2 CTRL 7200-CM4
--------------------------------
*Aug 7 07:46:25: %UPGRADE-5-SLOT_BEG: (Slot 3): Installing MAIN
(Slot 3): Download image
*Aug 7 07:47:21: %UPGRADE-5-SLOT_SUCC:
*Aug 7 07:47:21: %UPGRADE-5-SLOT_FIN: (Slot 3): A
*Aug 7 07:47:21: %UPGRADE-5-RESET_CARD: (Slot 3): Re
*Aug 7 07:47:26: %UPGRADE-5-SLOT_BEG: (Slot M2): Installing CTRL
(Slot M2): Download image!!!!!!!!!!!!!!!!!!!![OK - 1,215,232 bytes]
Waiting for image installed...Complete
*Aug 7 07:48:00: %UPGRADE-5-SLOT_SUCC: (Slot M2): CTRL installed.
*Aug 7 07:48:00: %
The upgrade of old-version line card will n
automatically after the main program has been installed. After reentering the m
Slot image linecard
5-14