Filter
Top Products
DES-7200 Configuration Guide Chapter 5 RERP Configuration
5-24
shared-port : GigabitEthernet 0/3(forwarding)
sub-port : GigabitEthernet 0/2(forwarding)
¾ Configurations of Switch C
Verify the RERP configurations on the secondary-edge device; key points: roles of
device on the primary ring and subring, and port state.
SwitchC#show rerp
rerp state : enable
rerp admin hello interval: 1(*1s)
rerp admin fail interval : 3(*1s)
rerp local bridge : 00d0.f834.56f0
-----------------------------------
region 1
ring : 1
rerp oper hello interval : 1
rerp oper fail interval : 3
ring master : 00d0.f822.35ad
ctrl-vlan : 4091
edge-vlan : 4092
role : transit
primary-port : GigabitEthernet 0/1(forwarding)
secondary-port : GigabitEthernet 0/3(forwarding)
ring : 2
rerp oper hello interval : 1
rerp oper fail interval : 6
ring master : 00d0.f822.3416
ctrl-vlan : 4092
edge-vlan :
role : secondary-edge
shared-port : GigabitEthernet 0/3(forwarding)
sub-port : GigabitEthernet 0/2(forwarding)
¾ Configurations of Switch D
Verify the RERP configurations on Master device of subring; key point: whether the
secondary port remains in blocked state while the ring is healthy.
SwitchD(config)#show rerp
rerp state : enable
rerp admin hello interval: 1(*1s)
rerp admin fail interval : 6(*1s)
rerp local bridge : 00d0.f822.3416
-----------------------------------
region 1