DES-7200 Configuration Guide Chapter 3 MPLS QOS
Configuration
3-20
Command Function
show policy-map [policy-name
[class class-name]]
Display QoS policy map,
Policy-name is the name of selected
policy map; when "class class-name"
is specified, the class map bound to
the corresponding policy map will be
displayed.
Example: Display all policy maps
DES-7200# show policy-map
Policy Map policy-2
Class class-2
set cos 2 none-tos
DES-7200#
3.4.3 Showing mls qos
interface
The user can execute the following steps to display the qos information of all
ports
Command Function
show mls qos interface [interface |
policers]
Display QoS information of interface,
and the "policers" option specifies the
policy map applied to the interface.
Example:
DES-7200# show mls qos interface gigabitethernet 1/1
Interface: GigabitEthernet 1/1
Attached input policy-map: policy-2
Attached output policy-map:
Default trust: none
Default COS: 0
Attached mpls cos-exp group:2
DES-7200#
DES-7200# show mls qos interface policers
Interface: GigabitEthernet 1/1
Attached input policy-map: policy-2
Attached output policy-map:
DES-7200#