Filter
Top Products
DES-7200 Configuration Guide Chapter 3 SSH Terminal Service Configuration
! Configure the login password for line 1-4 as "pass"
DES-7200(config)#line vty 1 4
DES-7200(config-line)#password pass
DES-7200(config-line)#privilege level 15
DES-7200(config-line)#exit
Configure SSH Client (PC1/PC2)
Open SecureCRT connection dialog box, as shown below. Use SSH1 for login
authentication. Any session name can be specified (here the session name is
configured as PC1-SSH1-10.10.10.10).
Configure SSH attributes. The host name is the IP address of SSH server
(10.10.10.10 in this example). Since user name is not required by the
currently-used authentication mode, you can type in any user name in the field
of "User Name", but this field cannot be left blank (the user name is "anyname"
in this example).
3-9