Filter
Top Products
DES-7200 Configuration Guide Chapter 5 System Upgrade Configuration
The user cannot u
Caution
File [chars] format error. It's not an install packa
Therein
se "upgrade system" command to degrade the
re version older than 10.4(2). If the manually
installed software is of version older than 10.4(2), the system will
ge.
, [chars] means the filename of current master program.
system to softwa
prompt the following error:
Caution
The interface prompts in the VSU status are different from that in the
single-machine mode, such as the “Slot 1/2” indicates the card on the
slot2 of the chassis1, while there is no chassis number in the
single-machine mode.
5.3.2.2 Upgrade of Cabinet Device
Steps to upgrade the cabinet device:
e
10.4(2) or higher version
Copy th ice:
cessing tftp://192.168.201.98/ DES-7200_V10.4(2)_R64047.bin...
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!
onize...
: 10.4.*, Release(64047)
Copy the new-version software to the devic
Reset the device
Wait for device installation
Upgrade to
e new-version software to the dev
DES-7200#copy tftp://192.168.201.98/DES-7200_V10.4(2)_R64047.bin
flash:firmware.bin
Ac
!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!
Other members are not present, quit synchr
Checking file, please wait for a few minutes ....
Check file success.
Transmission finished, file length 7243040
THE PROGRAM VERSION
Upgrade Master CM main program OK.
5-10