D-Link DES-7200 Refrigerator User Manual


  Open as PDF
of 1968
 
DES-7200 Configuration Guide Chapter 7 CPU Protection Configuration
7-4
nd-snp-rs
ND Snooping router request packet 128 4
nd-snp-ra-redirect
ND Snooping router advertisement and
redirection packet
128 4
hop_limit1
IPv6 Packet with Hop Limit=1 800 1
mpls_ttl0
MPLS Packet with TTL=0 128 1
mpls_ttl1
MPLS Packet with TTL=1 128 1
7.2.2 Configuring the Bandwidth
for Each Type of Packet
In the configuration mode, configure the bandwidth of each type of packet by performing the
following steps:
Command Function
DES-7200(config)# cpu-protect type
{arp | bpdu | dhcp | ipv6mc | igmp | rip |
ospf | vrrp | pim | err-ttl | unknown-ipmc
| dvmrp | …} pps pps_vaule
Set the bandwidth for the packets in PPS,
which is an integer.
DES-7200# end
Return to the privileged mode.
This example shows the bandwidth configuration process:
DES-7200(config)#cpu-protect type bpdu pps 200
Set packet type bpdu pps 100.
7.2.3 Configuring the Priority
Queue for Each Type of
Packet
In the configuration mode, configure the priority queue of each type of packet by performing
the following steps:
Command Function
DES-7200(config)# cpu-protect type
{arp | bpdu | dhcp | ipv6mc | igmp | rip
| ospf | vrrp | pim | err-ttl |
unknown-ipmc | …} pri pri_vaule
Set the priority queue for the packets,
pri_value is an integer.
DES-7200# end
Return to the privileged mode.
This example shows the priority queue configuration process:
DES-7200(config)# cpu-protect type bpdu pri 7
Set packet type bpdu priority 7.